Scraper Tach/Flakey Jake for Floor Concrete Grinder (Price does not include floor grinder)


  • $51.36/set of edges

Product Information

Strip Coatings From Surfaces

Coatings Removal System (SCRAPE-R-TACH®)
The SCRAPE-R-TACH floor coatings removal system utilizes two Tungsten Carbide inserts providing 16 wear edges. Designed for removing a wide range of urethanes, rubber membranes, material buildups, paints, mastics, etc. With production rates of up to several hundred square feet per hour the SCRAPE-R-TACH system brings a quick return on investment.

Tungston carbide
Removal of thicker layers of materials, including:
adhesives, epoxies, urethanes and paints
Tungsten carbide inserts feature 8 wear edges. Test procedure: scrape blunt file edge against surface to determine effectiveness. Use water and sand slurry to increase productivity on extrudable materials. Add weight to grinder to increase productivity
Service Life:
Variable from 1 to 8 hours per wear edge
(1) Quad-Sert™ insert: 1 inch x 1 inch

Electric or Propane Gas Dual Head Surface Grinders

Welded, unitized frame. Dual counter rotating multi-accessory discs with elastomeric-type gimbal heads; twin V-belt and spur gear reduction system; adjustable operator handle and wheel heights


Type: Honda, GXV340, 4-Cycle gasoline converted to propane
RPM: 3600
Horse Power: 11HP (82kw)
Starting Method: Mechanical rewind/electric starter optional

Type: Lesson, single phase, 115/230 VAC, 60 Hz
RPM: 3450
Horse Power: 2HP (1492w)

Structure: Unitized, welded steel plate
Bearings: High capacity, Zerk® type fittings
Drive System: Dual B Series, V-belt/pully and spur gear reduction
Multi-Accessory Disc: Two each, aluminum, counter- rotating
Disc Rotation Speed: 250 RPM

Width: 27-1/2 inch (699 mm)
Height: 38 inch (965 mm)
Length: 55-1/4 inch (1403 mm)


Related Products