Floor Concrete Grinder with Diamond Stones


  • $220.76
  • $220.76
  • $882.96
  • $2,457.42

Product Information

Diamonds - DIAM-A-TACH®

The SG24-2300 DIAM-A-TACH® Diamond Segment Grinding System offers an innovative solution for a wide variety of surface preparation job applications. The Omnitrix™ formulation allows the same matrix to be used on green concrete, high tensile epoxies, thin-film type floor coverings and fully cured concrete. Delivers balanced material removal rates and service life. This unique feature simplifies the proper matrix selection process and minimizes inventory stocking levels.

The rectangular-shaped, diamond segments have significantly greater thickness when compared to competitive products. Delivers substantially longer service life and higher ROI. The housing is directional marked for proper orientation to eliminate the top layer of tails from being inadvertently removed. Secures tight with a plastic wedge.

Use the SG24-2300 DIAM-A-TACH® Grinding System with General SG12 and SG24 Series Surface Grinders and popular models of competitive single and dual head surface grinders.


Industry standard diamonds
Removal of thin layers of materials without clogging,
including adhesives, epoxies, urethanes, paints and concrete
Units are directionally marked to increase diamond tail
service life. Normal segment wear: .015 inch per 8 hour day. Single matrix formulation for simplicity. Greater diamond segment thickness. Low acquisition cost. Use wet or dry
Sanded finish to a polished finished
Service Life:
Up to 50,000 square feet. (up to 15 time longer than carbide grinding stones)
5-5/8” (143 mm) L x 2-1/4” (57 mm) W x 2-1/4” (57 mm) H
Number of Segments per Unit:
Segment Grit: 30/40
Nominal Segment dimensions: 2” (52 mm) L x .400” (10 mm) W x .450” (11 mm) H
Grinding Area per Unit: 3.2 in² (520 mm²)
Weight, each: 2-1/4 lbs (1 kg)

Electric or Propane Gas Dual Head Surface Grinders

Welded, unitized frame. Dual counter rotating multi-accessory discs with elastomeric-type gimbal heads; twin V-belt and spur gear reduction system; adjustable operator handle and wheel heights


Type: Honda, GXV340, 4-Cycle gasoline converted to propane
RPM: 3600
Horse Power: 11HP (82kw)
Starting Method: Mechanical rewind/electric starter optional

Type: Lesson, single phase, 115/230 VAC, 60 Hz
RPM: 3450
Horse Power: 2HP (1492w)

Structure: Unitized, welded steel plate
Bearings: High capacity, Zerk® type fittings
Drive System: Dual B Series, V-belt/pully and spur gear reduction
Multi-Accessory Disc: Two each, aluminum, counter- rotating
Disc Rotation Speed: 250 RPM

Width: 27-1/2 inch (699 mm)
Height: 38 inch (965 mm)
Length: 55-1/4 inch (1403 mm)


Related Products