Description of Operation

The operator controls blasting from a remote-control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Requirements for Operation

These items are required but not ALL included with this equipment:

Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).

Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.

OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.

NIOSH-approved, type CE, supplied-air respirator.

Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).

Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.

Appropriate blast suit, work boots, hearing and eye protection.