Call Four Star Rental Today!

Where Quality is First!


1504 Bashor Road
Goshen, IN 46528

View Our Location

Floor Concrete Grinder W/Diamond Stones

Diamonds – DIAM-A-TACH®

The SG24-2300 DIAM-A-TACH® Diamond Segment Grinding System offers an innovative solution for a wide variety of surface preparation job applications. The Omnitrix™ formulation allows the same matrix to be used on green concrete, thin-film type floor coverings and fully cured concrete. Diamond stones are primarily used for prepping concrete for coatings such as paint, epoxy, and other finishes. Opens up pores of concrete so finishes will stick and last.

The rectangular-shaped, diamond segments have significantly greater thickness when compared to competitive products. Delivers substantially longer service life and higher ROI. The housing is directional marked for proper orientation to eliminate the top layer of tails from being inadvertently removed. Secures tight with a plastic wedge.



Industry standard diamonds


Removal of thin layers of materials without clogging, including urethanes, thin worn paints and concrete


Units are directionally marked to increase diamond tail

service life. Normal segment wear: .015 inch per 8 hour day. Single matrix formulation for simplicity. Greater diamond segment thickness. Low acquisition cost. Use wet or dry


Sanded finish to a polished finished

Service Life:

Up to 50,000 square feet. (up to 15 time longer than carbide grinding stones)


5-5/8” (143 mm) L x 2-1/4” (57 mm) W x 2-1/4” (57 mm) H

Number of Segments per Unit: 4

Segment Grit: 30/40

Nominal Segment dimensions: 2” (52 mm) L x .400” (10 mm) W x .450” (11 mm) H

Grinding Area per Unit: 3.2 in² (520 mm²)

Weight, each: 2-1/4 lbs (1 kg)

Electric or Propane Gas Dual Head Surface Grinders

Welded, unitized frame. Dual counter rotating multi-accessory discs with elastomeric-type gimbal heads; twin V-belt and spur gear reduction system; adjustable operator handle and wheel heights




Type: Honda, GXV340, 4-Cycle gasoline converted to propane

RPM: 3600

Horse Power: 11HP (82kw)

Starting Method: Mechanical rewind/electric starter optional


Type: Lesson, single phase, 115/230 VAC, 60 Hz

RPM: 3450

Horse Power: 2HP (1492w)


Structure: Unitized, welded steel plate

Bearings: High capacity, Zerk® type fittings

Drive System: Dual B Series, V-belt/pully and spur gear reduction

Multi-Accessory Disc: Two each, aluminum, counter- rotating

Disc Rotation Speed: 250 RPM


Width: 27-1/2 inch (699 mm)

Height: 38 inch (965 mm)

Length: 55-1/4 inch (1403 mm)

Rental Rates  
Minimum $243.20
Day $243.20
Weekly $972.73

Call to Rent this Item Today!